United Engine Corp of Russia Begins Work on Next-gen Helicopter Engine
http://www.defenseworld.net/news/22208/United_Engi.....rYrYGeG85s Citat:The sample engine is expected to be complete in 2021 while the power unit is supposed to be ready for serial production in 2025. The weight of the unit will be reduced by 15 per cent compared to existing competitive models while its operation costs will be 30 per cent lower.
Novi motor za helikoptere. Rok 2025 godina.
PD-35 Is The Driving Force Of The Aerospace Development In Russia
https://www.ruaviation.com/docs/3/2018/3/23/185/ Citat:This will happen in stages. First of all, the designer will create the product. At some point it becomes clear: this is the construct that suits us, let's "run it in iron" and create a prototype. This is approximately 2022 year.
Prototip oko 2022 godine.
Citat:The engine-demonstrator is going to be built somewhere around 2023.
Citat:I believe that the launch of PD-35 in the series is somewhere around 2028.
Gde idu pare za razvoj.
ОАК распределила авиаремонтные заводы по дивизионам
Citat:Полномочия единоличного исполнительного органа ОАО «20 АРЗ», АО «121 АРЗ», ОАО «275 АРЗ», ОАО «322 АРЗ», АО «514 АРЗ» переданы ПАО «Компания «Сухой». Полномочия единоличного исполнительного органа АО «123 АРЗ», ОАО «308 АРЗ», ОАО «325 АРЗ» переданы ПАО «Ил». Полномочия единоличного исполнительного органа АО «360 АРЗ» переданы ПАО «Туполев».
Russia certifies PD-14 engines for MC-21 jets
https://www.ruaviation.com/news/2018/10/18/12201/ Citat:The PD-14 engine is developed by the United Engine Corporation (UEC). It is expected that by the end of 2018, three serial PD-14 engines will be produced and delivered to Irkut Corporation (the developer and manufacturer of the MC-21 aircraft).
Certificiranje motora z MC-21. Do kraja godine tri komada dobavu.
Russian Helikopters u poslovnim problemima, pa odlučili da maltretiraju domače kupce!
Krajem prošle godine, u studenom 2018. godine u gradu Kazanu, Ruskoj Federaciji održan je forum Organizacije helikopterske industrije. Kako piše portal Versia.ru, na Forumu je izraženo nezadovoljstvo radom i politikom koncerna Russian Helicopters. Zbog propusta i gubitaka na stranim tržištima, Russian Helicopters su odlučili nadoknaditi na domaćim korisnicima helikoptera. Inzistiranje da se jednom kupljeni helikopteri moraju održavati u holdingu po izuzetno visokim cijenama dovodi do odbijanja kupaca. Jedna od glavnih tema Foruma je bila pokušaj holdinga da zabrani eksploataciju helikoptera Mi-8 starijih od 25 godina, kako bi prisilili kupce na nabavu novih helikoptera. Time bi se iz eksploatacije izbacilo helikoptere Mi-8T, po statistici jedne od najsigurnijih helikoptera na svijetu, i zamijenilo ih se novijim Mi-8MTV i Mi-8AMT, upola manje sigurnima i tri puta manje pouzdanima...
Russia to replace French engines on Ka-62 helicopters
https://www.ruaviation.com/news/2019/9/9/14114/
"Citat:We have launched two other projects with the designers of these engines — UEC-Klimov. The first one is the VK-650V engine for Ka-226. Based on the solutions for this engine, a branch of power systems between 500 and 700 horsepower can be created. The second project is VK-1600V. This is the main engine that will be installed on Ka-62 helicopters," Shmotin said.
A technical blueprint for a VK-650V engine will be agreed this year, and the engine itself will be assembled in the near future, Shmotin said.
Konstrukcija novih motora za Ka-226 i Ka-62.
Otisli motori za SAD
Три двигателя РД-180 отправлены в США Citat:Три жидкостных ракетных двигателя РД-180 были отправлены в США 29 октября. Двигатели предназначены для использования в составе американских ракет-носителей семейства Atlas.
https://www.aex.ru/news/2019/10/31/204159/ Citat:"В соответствии с контрактными обязательствами Научно-производственное объединение "Энергомаш" имени академика В.П. Глушко (входит в состав Госкорпорации "Роскосмос") 29 октября 2019 года осуществило отправку в США трех жидкостных ракетных двигателей РД-180, ранее принятых заказчиком", - отмечается в сообщении компании.
В Роскосмосе напоминают, что в середине октября представителями компаний Pratt&Whitney, United Launch Alliance, РД АМРОСС были подписаны формуляры на три товарных двигателя. После приемки двигатели РД-180 были подготовлены к отправке и 29 октября в 06:15 по московскому времени отправлены заказчику.
Ракетные двигатели РД-180 предназначены для использования в составе американских ракет-носителей семейства Atlas.
Roscosmos plans to launch over 40 space rockets in 2020
https://www.ruaviation.com/news/2019/12/31/14530/ Citat:"In 2020, Russia plans to carry out more than 40 space rocket launches," Roscosmos said in a statement.
Roscosmos will conduct space launches from the Baikonur, Vostochny and Plesetsk spaceports and the space center in French Guiana, the statement says.
Ove godine je planirano 40 lansiranja satelita.
Dopuna: 20 Jan 2020 20:31
Safran: “We are open to increasing the Russian share in the production of components”
https://www.ruaviation.com/docs/12/2020/1/17/269/ Citat:Last spring, Sukhoi Civil Aircraft CJSC (SCAC) announced the creation of the SSJ100R option for Iranian airlines with a share of US components in the total cost of the aircraft below 10%, which removes it from the scope of the EAR600 document. According to him, the White House requires all local and foreign aircraft manufacturers that produce finished products with a share of US components of more than 10% to obtain special permission to export them to “rogue countries”. The relevant licenses are issued by the Office of Foreign Assets Control (OFAC).
Meanwhile, according to the estimates of the European participants in the SSJ100 project, their contribution to the complete set of the final product is “more than sixty percent”.
Gde je problem kod SSJ 100.
Citat:Despite the efforts made, PowerJet has so far not been able to increase the annual release rate of the new SaM.146 over sixty units, mainly due to the shortage of individual US components. As you know, PCC Structurals, TECT Corp., Chromalloy, Carpenter, Cannon Muskegon and Hayes International are the key US suppliers of the program.
Based in Portland, Oregon, PCC Structurals calls itself “the world leader in foundry products for aluminum, titanium and composite alloys (superalloy).” In particular, she has mastered advanced investment casting methods. The position of this company in the global market strengthened after its acquisition in 2015 by the well-known American investor and entrepreneur Warren Buffett, operating through Precision Castparts Corp PCP.N. A situation arose in which PCC Structurals actually took a monopoly position in the world in the market for the supply of complex titanium parts.
Ne mogu povećati proizvodnju motora, jer je usko grlo deo iz Amerike. Firma za ulivanje aluminija, titana i kompozitnih materiala.